TargoBENDIX UV is a high-performance tape for outdoor use for permanently windtight bonding of façade membranes
– especially for façades with open joints/gapped cladding. The tape is installed behind the façade cladding and is later invisible, while remaining UV-resistant and reliably performing its sealing function.
The release liner on the back is slit in the center in a 20/40 mm ratio and can be removed from one side. Ideal for corner bonds.
Areas of application
For windtight sealing of:
-
Overlaps of façade membranes
-
Connections to building components
-
Penetrations (e.g. cables/pipes) in the façade area
Suitable substrates / membranes
Suitable substrates:
-
Wood and hard wood-based panels
-
Gypsum fiber and gypsum plasterboard panels
-
Painted wood / hard plastic
-
Corrosion-protected metal
Suitable membranes:
Advantages
-
UV-resistant – ideal behind façades with gapped cladding
-
Permanently windtight for overlaps, connections and penetrations
-
Acrylate adhesive for high-performance, long-lasting bonds
-
Environmentally friendly: free of solvents, chlorine and formaldehyde
-
supple and easy to stretch
-
Release liner slit in the center - ideal for corner bonding
Application notes
-
Substrates/membranes must be sound, dry, and free from dust and grease.
-
Seal overlaps and connections without gaps.
-
On strongly textured or contaminated substrates, use TargoPRIMER S / M in advance.
Important: The tape performs the function of the (air-/wind)tight seal, not that of a load-bearing connection. Connect/overlap membranes without tension and, if subjected to tensile loads, secure mechanically.
Technical data (excerpt)
Dimensions & Packaging
-
Width: 60 mm 20/40 mm
-
Rolls/carton: 10 rolls
Data sheet and application instructions PDF