STEICOzell – Wood Fibre Blown-in Insulation 15 kg Bag
STEICOzell – Wood Fibre Blown-in Insulation 15 kg Bag
Preview: STEICOzell – Wood Fibre Blown-in Insulation 15 kg Bag
Preview: STEICOzell – Wood Fibre Blown-in Insulation 15 kg Bag
STEICOzell – Wood Fibre Blown-in Insulation 15 kg Bag
STEICOzell – Wood Fibre Blown-in Insulation 15 kg Bag
STEICOzell – Wood Fibre Blown-in Insulation 15 kg Bag
Mobile Preview: STEICOzell – Wood Fibre Blown-in Insulation 15 kg Bag
Mobile Preview: STEICOzell – Wood Fibre Blown-in Insulation 15 kg Bag
wishlist Add to wish list

STEICOzell – Wood Fibre Blown-in Insulation 15 kg Bag

Shipping time:
ca 1-3 days ca 1-3 days (abroad may vary)
Sliding scale prices
1-17 units
per 24,90 EUR
18-35 units
per 21,50 EUR
> 35 units
per 19,90 EUR
24,90 EUR

incl. 19% tax excl. Shipping costs

Ask about product
Description

STEICOzell – Wood Fibre Blown-in Insulation, 15 kg Bag

STEICOzell is an ecological wood fibre blown-in insulation made from pure wood fibres for all closed cavities in roofs, walls and ceilings. The fibre material is installed under pressure using a blowing machine into the framing and completely fills cavities flexibly, seamlessly and without offcuts – even in complex constructions or where services run within the cavity.

Properties & Benefits

  • Seamless, offcut-free cavity insulation (flexible to fit any shape)

  • Vapour-permeable – increased structural safety

  • Very good winter insulation & excellent summer heat protection (high heat storage capacity)

  • Hygroscopic (moisture-buffering) for a comfortable indoor climate

  • Long-term settlement resistance with low material consumption

  • Particularly economical – no offcuts; sweepings can be reused

  • Sound and fire performance documentation available

Areas of Application

Blown-in insulation for closed building component cavities in roofs, walls and ceilings. In addition, STEICOzell can also be used as open blow-in insulation when it is blown as an exposed insulation layer onto horizontal, curved or moderately sloped surfaces (e.g. top-floor ceiling).

Installation

  • Installed using suitable blowing/open blow-in machine technology via hoses to the point of application.

  • According to the data sheet, installation is carried out by trained partners/licensed contractors in accordance with the approval.

  • Note on settlement resistance: prerequisite is the blown-in quantity according to the compaction table and an even distribution within the cavity.

Technical Data (excerpt)

  • ETA: 12/0011

  • Declared thermal conductivity: λD = 0.038 W/(m·K)

  • Design thermal conductivity (MVVTB): λB = 0.040 W/(m·K)

  • Recommended density: open blown approx. 32 kg/m³ | closed cavities approx. 35–45 kg/m³

  • Water vapour diffusion resistance: μ = 1/3

  • Specific heat capacity: 2,100 J/(kg·K)

  • Ingredients: wood fibre, fire retardant (ammonium sulphate)

Packaging

  • Bag weight: 15 kg

Pre-dimensioning tip: approx. 40 kg/m³ or 2.5–3.0 bags/m³ (guide value).

Data sheet PDF
Installation instructions PDF