DOBAU® Plast S 5 kg – Liquid Waterproofing for Balconies, Terraces & Flat Roofs
DOBAU® Plast S is a liquid-applied, highly elastic waterproofing compound based on a polymer-bitumen emulsion – ideal for balconies, terraces and flat roofs for refurbishment and maintenance. The compound is thixotropic (non-sag), crack-bridging and solvent-free. Excellent adhesion to bitumen-based as well as mineral substrates – also easy to apply on slightly damp surfaces.
Key Benefits at a Glance
-
Liquid-applied (brush/trowel) – ideal for surfaces, details and joints
-
Highly elastic & crack-bridging – compensates for movements/stresses
-
Thixotropic – stable even on vertical surfaces
-
Excellent adhesion to bitumen-based & mineral substrates
-
Solvent-free
-
Ageing- & heat-resistant – suitable for outdoor use
Typical Applications
-
Balcony and terrace waterproofing (surfaces & connections)
-
Flat roof/garage roof waterproofing for refurbishment
-
Waterproofing of below-ground structural elements against ground moisture
Application
-
Prepare the substrate: firm, even, clean; fill depressions > 5 mm beforehand.
-
Primer/pre-coat: For reliable bonding on e.g. old/new roofing membranes or sheet metal, a primer such as DOBAU® Voranstrich Duo is recommended.
-
Important: Do not use on tar-containing membranes (tar is incompatible).
-
Application: Apply at least 2 coats, with or without reinforcement inlay, e.g. DOBAU® Fleece.
-
Drying: Apply the next coat only after complete drying (depending on conditions 1–3 days).
-
Weather conditions: Component and ambient temperature > +5 °C; protect from rain/frost during drying.
Consumption (Guideline Values)
| Application |
Build-up |
Consumption |
| Balcony / Terrace |
min. 2-coat system |
approx. 1.5 kg/m² per coat
Provide a separating layer (e.g. PE film) between waterproofing & finish. |
| Flat Roof |
min. 2-coat system (with fleece) |
approx. 1.5 kg/m² per coat |
| Against Ground Moisture |
min. 2-coat system |
approx. 1.5 kg/m² per coat |
Technical Highlights
-
Packaging: 5 kg bucket
-
Colour: black
-
Base: polymer-bitumen emulsion waterproofing, solvent-free
-
Application temperature: approx. +5 °C to +40 °C
-
Storage: frost-free, in original sealed container for at least 12 months