TESCON PRIMER RP dispenser bottle 1 l - Solvent-free primer, no drying required
Application
For preparing and strengthening substrates for subsequent bonding with pro clima adhesive tapes such as TESCON VANA, TESCON PROFECT and tapes from the EXTOSEAL line. Suitable for wood, wood fiber boards, masonry, roofs, walls and floor slabs.
Advantages
- No drying required: bonding can be carried out directly in the still moist primer on absorbent substrates
- Deep penetration of the primer, excellent consolidation
- Application also on damp substrates
- Can be applied even in frost conditions
- Compatible with all pro clima adhesive tapes
- Solvent-free
Substrates
Before bonding, substrates should be swept clean with a broom or vacuumed. Application on frozen substrates is not possible. There must be no repellent substances on the surfaces to be primed (e.g. grease or silicone).
All mineral surfaces such as plaster or concrete can be pre-treated. It is also suitable for consolidating porous materials such as wood fiber underlay boards. In addition, (old) wooden substrates can be prepared for bonding.
If diffusion-inhibiting BUDAX TOP is bonded to relatively dense, non-absorbent substrates (e.g. concrete), the primer must first dry completely before the adhesive tape is applied.
Diffusion-open, absorbent substrates (e.g. wood fiber underlay boards) may be slightly damp. The respective adhesive tape can be applied directly onto the still moist primer.
Data Sheet PDF
Installation Instructions PDF
