Unifloc Cellulose Insulation – Pallet 315 kg
Unifloc is a loose, capillary-active cellulose fibre insulation material made from pure recycled newspaper. Installation is carried out mechanically using blowing machines by trained specialist contractors into suitable cavities in roofs, floors and walls. The material forms a low-joint insulation layer and supports balanced moisture behaviour.
Your Benefits
-
Easy to install: using blowing technology by trained specialist contractors
-
Very good insulation performance: thermal conductivity λD = 0.038 W/(mK).
-
Capillary-active & hygroscopic: absorbs moisture and releases it again.
-
Tested & certified: ETA/CE, VOC tested.
-
Fire protection: B2 according to DIN 4102; Euroclass E / B-s2,d0.
-
Insulation layers up to 400 mm possible in a single pass
Areas of Application
-
Suitable cavities in roofs, floors and ceilings
-
Storage and attic floor areas
-
Top-floor ceiling (not walkable, or with a suitable covering)
Technical Data (excerpt)
| Insulation material |
Cellulose fibre (from pure recycled newspaper), loose fill |
| Thermal conductivity |
λD = 0.038 W/(mK) |
| Water vapour diffusion resistance |
µ = 1–2 |
| Specific heat capacity |
2544 J/(kgK) |
| Fire behaviour |
B2 (DIN 4102) / Euroclass E, B-s2,d0 (EN 13501-1) |
| Mould resistance |
Rating class 0 (EN ISO 846) – no risk of mould growth |
| Bulk density (depending on application) |
30–65 kg/m³ |
| Approval |
ETA-08-0009 / CE |
Data sheet PDF
Brochure PDF
