TargoFIX SK is a permanently elastic, high-performance sealing compound for interior construction – ideal for airtight wall/component connections of vapor control layers and vapor barriers. The adhesive impresses with a wide adhesion spectrum (suitable for all vapor control layers/barriers), excellent adhesion without primer (also on slightly damp substrates) as well as extremely high aging resistance – the adhesive remains permanently elastic. Designed for applications in accordance with DIN 4108 / SIA 180
Application notes
Substrate preparation: Substrates must be sound (clean/low-dust; depending on the substrate condition).
Wet method:
-
Apply adhesive continuously as a bead at least 8 mm wide
-
Create a relief loop in the vapor control layer
-
Press the membrane gently into the bead – the bead must remain at least 4 mm thick
Dry method:
-
Apply adhesive continuously as a bead at least 8 mm wide and allow to dry for 1–2 days
-
Create a relief loop, press the membrane on firmly
Important: TargoFIX SK provides the sealing function, not that of a load-bearing connection. Therefore, connect membranes without tension; without a relief loop, the connection must be mechanically secured (e.g. with a termination batten).
Advantages
-
Solvent- and formaldehyde-free (low-odor, suitable for indoors)
-
Very high aging resistance – remains permanently elastic, tested under extreme conditions
-
Wide adhesion spectrum – suitable for all vapor control layers/vapor barriers
-
Adheres without primer, even on slightly damp substrates
-
Good stand-up strength – clean and easy to apply
Technical key data
-
Composition: permanently elastic high-performance sealing compound without solvents and formaldehyde
-
Minimum application temperature: from –5 °C
-
Temperature resistance: –30 °C to +60 °C
-
Frost resistance: down to –30 °C
-
Storage: dry at room temperature, without direct sunlight
Forms of supply & packaging
-
Cartridge: 310 ml –
-
Carton: 12 cartridges
Data sheet and application instructions PDF