TargoFIX 1A (310 ml cartridge) is a permanently plastic, high-performance sealing compound based on acrylate
for the wind-tight bonding of membrane overlaps as well as edge and wall connections – specifically for outdoor applications. Thanks to its weather resistance and extreme aging resistance, TargoFIX 1A is ideal when connections must remain reliably secure over the long term. Suitable for applications in accordance with DIN 4108 / SIA 180 – and also suitable for wall connections indoors.
Typical applications
-
Membrane overlaps – seal wind-tight
-
Wall/edge connections outdoors (e.g., on mineral substrates)
-
Also suitable for wall connections indoors
Advantages
-
Weather-resistant – ideal for outdoor applications
-
Extremely resistant to aging and weathering
-
Excellent adhesion without primer, even on damp substrates
-
Good sag resistance – clean and easy to apply
-
High bonding strength, good resistance to embrittlement and high resistance when exposed to moisture
Application notes
Substrate: Materials and substrates to be bonded must be dry, sound, and free from dust and grease.
Application:
-
Depending on the substrate, apply continuously as a bead at least 8 mm wide
-
Press the membrane gently onto the bead – the bead must remain at least 4 mm thick
Overlaps & connections:
-
Overlaps: overlap without tension
-
Edge connections: connect without tension; for vapor barriers, forming a relief loop is recommended
Important: TargoFIX 1A provides the sealing function and not a load-bearing bond. If tensile forces may occur, connections must always be mechanically secured.
Technical data
-
Base: Permanently plastic, high-performance sealing compound on an acrylate basis, solvent-containing
-
Open time: approx. 30 minutes
-
Drying time: approx. 3 days
-
Application temperature: from +5 °C
-
Temperature resistance: –40 °C to +90 °C
-
Storage: store dry at room temperature; frost-insensitive
Available formats & packaging
Data sheet and application instructions PDF