TargoPRIMER M – High-performance primer for absorbent substrates (500 g)
TargoPRIMER M is a fast-drying primer for rough, porous, sandy and slightly dusty substrates for interior and exterior use. It makes difficult surfaces adhesive-friendly and ensures reliable bonding of acrylate and butyl adhesive tapes. In addition, TargoPRIMER M consolidates/stabilizes the substrate, which is especially helpful on wood fibreboards.
Key benefits
-
Fast drying – short waiting times (approx. 5–20 min depending on temperature)
-
Optimizes adhesion on absorbent/rough substrates
-
Improves bonding of acrylate & butyl adhesive tapes
-
Strengthens the substrate, especially on wood fibreboards
-
Suitable for indoor & outdoor use
Suitable substrates
-
Rough-sawn wood
-
Wood fibreboards (soft to hard)
-
Gypsum fibre boards & plasterboard
-
Concrete (smooth to rough)
-
Plaster, mortar, gypsum
-
Bitumen membranes (smooth or sanded)
Application / processing
-
Substrates must be dry, dust-free and free of grease.
-
Apply evenly and fully covering with a brush, in a width matching the adhesive tape to be applied afterwards.
-
Allow to dry and protect primed surfaces from dust and moisture.
-
For very heavily textured substrates, apply a second coat if necessary.
Technical data
-
Packaging: 500 g can (10 cans/carton)
-
Application temperature: from -5 °C
-
Drying time: approx. 20 min (5 °C) / 10 min (10 °C) / 5 min (20 °C)
-
Temperature resistance: ≤ 90 °C
-
Shelf life: min. 12 months (store cool and dry)
-
Note: contains solvents – observe the safety data sheet.
Tip: Ideal when you need clean, long-lasting tape adhesion on demanding, absorbent substrates.
Datasheet and installation instructions (PDF)
