Nonwoven vapour barrier Targo V 25 made of coated PP nonwoven, size 1.5 m x 50 m, roll 150 m²

TargoVAP V25 is a professional, particularly robust yet flexible vapour barrier

for interior applications. It is ideally suited for constructions with between-rafter insulation and, thanks to its translucent design, offers pleasantly easy handling (better visibility of the substrate and overlaps).

The membrane is made of coated PP nonwoven (mono-material), is ecologically and building-biology safe and can be recycled without difficulty. For a permanently airtight installation, we recommend the coordinated products of the Targo sealing & bonding system (system warranty).
 

Advantages

• Very robust yet flexible – high mechanical stability

• Translucent: makes alignment, overlaps and installation easier

• Especially suitable for blown-in insulation (stable, practical)

• Mono-material, coated PP nonwoven – recyclable and building-biology safe

Installation

• Overlap: according to the marking line, at least 10 cm.

• Placement: install the vapour barrier with the print facing the installer.

• Blown-in insulation: relieve joints that are not directly on a rafter with a support batten; install the battens that carry the insulation load before blowing in; make the blow-in opening as a “star cut”.

• Substrate: dry, free of dust and grease; prime porous/dusty substrates (e.g. TargoPRIMER S/W).

• Seal overlaps airtight: e.g. with TargoRAPID or TargoBENDIX; press/rub down the bonding area firmly.

• Wall connections: e.g. with TargoFIX SK or alternatively with TargoWALLIT / TargoWALLIT PLUS.

• Seal penetrations: e.g. with TargoFlex or TargoBENDIX.

Technical Data

Data sheet (PDF)
Installation instructions (PDF)