Self-Adhesive Roof Waterproofing Membrane 1 m x 5 m - Sealing Without Flame
Heavy-duty quality with 1.5 mm thickness - made in Germany
This self-adhesive roof waterproofing membrane based on bitumen is a practical solution for permanently watertight roof surfaces. Ideal for garden houses, sheds and slightly pitched roofs. The membrane is cold-applied, requires no torch, offers strong adhesion and features a UV-resistant coated aluminium top layer.
Advantages
- Self-adhesive and cold-applied, no open flame required
- Fast installation, ideal for DIY users and professionals
- Strong adhesion when applied correctly
- UV-resistant coated aluminium surface
- Suitable for garden houses, sheds, extensions and slightly pitched roofs
- Roll size: 1 m x 5 m = 5 m²
Suitable Substrates
Suitable for concrete, masonry, metal, plastics except PVC, and dry, non-resinous wood. The substrate must be dry, dust-free, silicone-free, grease-free and load-bearing. Porous or slightly contaminated surfaces should be prepared with a bituminous primer and allowed to dry completely.
Application
- Recommended application from +15 °C. Membrane and substrate should be at least +15 °C.
- Use Bitumen Primer V on old wood, concrete and existing bitumen membranes.
- Use universal primer on sanding or chalking surfaces.
- Install the membrane lengthwise in the direction of the slope.
- First remove approx. 10 cm of the backing film and align the membrane cleanly.
- Roll out section by section and press or roll firmly. Avoid air pockets.
- Allow approx. 10 cm overlap and roll firmly.
Technical Data
| Thickness |
approx. 1.5 mm |
| Mass per unit area |
approx. 1.5 kg/m² |
| Adhesion strength |
> 30 N/25 mm |
| Watertightness |
passed (2 kPa) |
| Cold bending behaviour |
down to ≤ -20 °C |
| Softening point |
≥ 85 °C |
| Colour |
Copper |
| Top layer |
Aluminium, coated, UV-resistant |
| Format |
1.0 m x 5.0 m |
| Coverage per roll |
5 m² |
Data and Installation PDF
